Service Crew at Geita Gold Mining Ltd

Responsibilities:

Safety:

• Learn and follow the safety requirements related to your work.
• Consider what could go wrong and what needs to be done to work safely before starting a task.
• Report to supervisor if a task cannot be done safely.
• Utilize Take 5 tool to identify hazard at the workplace.
• Suggest ways to improve safety performance.
• Promptly report all injuries, damages or incidents.
• Help others to work safely.

Installation of underground services – Air, water and dewatering lines:

• Stretch poly pipes to make it straight and tow to required location.
• Install, connect and hang poly pipes on the J-triple hook hangers secured with chain and shackles.
• Install air droppers lifted at least 1.5m above the ground level.
• Blow pipes to free dirty inside pipes before connecting headers on.
• Headers should be properly chained to the wall via an eye bolt or on the spilt set plate with shackles.
• Installation of secondary ventilation.
• Install fan at correct location as per approved installation plan.
• Install and tight by attaching to rock bolt with shackles a plastic-coated steel knocker line.
• Hang and extend ventilation bags to at least 20m from the face.

Working with underground electrical submissible pumps:

• Set the pump in the sump or in decline to pump out water.
• Hang and support the pump cable clear off the floor.
• Check the pump in the sumps and report any defect noted.

Cleaning of Mono Pumps:

• Open the drain valve to release mud and dirty water.
• Hosing with mine pressurized water in the mono tank.
• Cleaning steel step ladders and landing platform.
• Inspect all connection on the pipes and on mono tank.

Installing, Grouting and Tensioning of Cable Bolts:

• Inspect, prepare equipment, tools and materials required for the job.
• Uncoil cable bolts, attach breather tubes, and transport them to working area.
• Safely insert cables into the holes and seal hole collar.
• Prepare cement grout mix and grout the cables/holes to standard.
• Perform general housekeeping after the work is completed.
• After grout is set and hardened, apply tension on the cable bolt as per required Geotechnical standard.

Hanging and retrieving electrical cables:

• Hang cables on the backs, suspended on the hooks and separated from services.
• Position cables and back-to-back connections to location where it cannot be damaged.
• Hang Jumbo trail cables on L-pins and install trail cable sign on the ground.
• Rolling inside an IT Basket when retrieving cables.

QUALIFICATIONS:

• Secondary School Education Examination (CSEE).
• Valid Tanzanian Driving Licence.
• Valid Blasting License (Supplementary).
• GGML is an equal opportunity employer: Female candidates are highly encouraged to apply.

EXPERIENCE:

• 1-2 years of operational experience in UG Mining environment or any industrial field.
• Any practical experience related to civil or Infrastructure works.
• Any practical experience of operating Open Pit Mining or earthwork machinery.

METHOD OF APPLICATION

Submit your CV and Application on Company Website : Click Here

Closing Date : 25th October 2023.